Novant Health | Plumbing Operations and Maintenance 201
Novant Health | Plumbing Operations and Maintenance 201
Assessment Summary
0 of 13 Questions completed
Questions:
Information
You have already completed the assessment before. Hence you can not start it again.
Assessment is loading…
You must sign in or sign up to start the assessment.
You must first complete the following:
Results
Results
0 of 13 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Novant Health | Plumbing Operations and Maintenance 201 0%
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 13
1. Question
What is the stationary portion of the valve that stops flow completely when it’s in contact with the movable portion?
CorrectIncorrect -
Question 2 of 13
2. Question
What utility or system is a typical application for a hot water mixing valve?
CorrectIncorrect -
Question 3 of 13
3. Question
What unit of measurement is used to define pump head?
CorrectIncorrect -
Question 4 of 13
4. Question
What device is used to prevent excessive water pressure?
CorrectIncorrect -
Question 5 of 13
5. Question
What value type is a pressure relief valve combined with and controlled by a self-actuated auxiliary pressure relief valve?
CorrectIncorrect -
Question 6 of 13
6. Question
A triple duty valve fulfills the same function as a check valve, stop valve, and what other device?
CorrectIncorrect -
Question 7 of 13
7. Question
Reverse osmosis water is required to have what type of piping?
CorrectIncorrect -
Question 8 of 13
8. Question
What pipe material can be used for laboratory waste and vent applications?
CorrectIncorrect -
Question 9 of 13
9. Question
What is the typical steam pressure for a domestic hot water heater?
CorrectIncorrect -
Question 10 of 13
10. Question
What is the protocol for turning the domestic hot or cold water over for domestic use after it has been down for 2 or more weeks?
CorrectIncorrect -
Question 11 of 13
11. Question
Where should an isolation valve be installed in relation to the dielectric union when connecting two different piping materials?
CorrectIncorrect -
Question 12 of 13
12. Question
What type of backflow protection is typically used for a standard sink faucet?
CorrectIncorrect -
Question 13 of 13
13. Question
What is the minimum temperature requirement for the final rinse cycle in dishwashers?
CorrectIncorrect
